Programming The Secondary Filter Cycle - Jacuzzi J - 415 Owner's Manual

13.2

Programming the Secondary Filter Cycle

1. To program the Secondary Filter
cycle, press button C (Figure B, pg.
71). This cycle will activate the
main jet pump to run for additional
filtration when programmed (Figure
E). If you choose not to use this
feature, please skip this section.
2. When you enter the Secondary Filter
Cycle submenu, the "Day Settings"
will be selected (Figure F). From this
menu, you can set the day, time, and
duration. Press the Splash button on
the Quad Keypad to confirm
selection.
3. You can choose the day(s) you
would like to run a secondary filter
cycle (Figure G). Press the Up or
Down button on the Quad Keypad
to scroll through and change the
days you would like the filtration to
run. Press the Left or Right button
to turn "ON" (
filtration for that day.
4. Press the Splash button to save settings.
5. Press button D to return to the submenu to continue programming
the start time and duration (Figure F).
6. Press the Down button on the Quad
Keypad to select "Start Time" (Figure
H). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to filter. Press the
Down button on the Quad keypad to
access the "Duration" setting.
Note: If you are using a standard 12-
hour period, you will see the hour displayed as "1PM." For the
24-hour period it will read "1300."
) or "OFF" the
SETTINGS 2
Primary
Secondary
2
3
Press to
reset to default
SECONDARY
Day Settings Day Settings
Start Time
Duration
3
Press to Enter
SECONDARY
OFF
Monday
Tuesday OFF
Wednesday OFF
Thursday OFF
Friday OFF
Saturday OFF
Sunday OFF
3
Press to Enter
SECONDARY
Day Settings
Start Time Start Time
1AM
Duration
3
Press to Save
J-400
OFF
Figure E
Select
Figure F
Select
Figure G
Select
Figure H
Page 73