J-1000 Audio System Ipod Operation - Jacuzzi J - 480 Owner's Manual

button (3) to choose ONE or ALL. Press ENT button (9) to confirm
selection.
• If ONE COPY is selected: The record percent "DOWN LOAD xx%"
will display on the LCD (17). After copying is finished, the next track
will automatically begin playback.
• If ALL COPY is selected: "The number of total track --> the number of
recorded track" will display on LCD (17). After copying is finished, the
unit will beep for about 3 seconds, then automatically begin playback
of track #1.
note: In copying process, you can change to other modes. (USB and
NAND modes could not be selected.) While in other modes, the screen
will default to the downloading process after 3 seconds.
3. Deleting music Files from nanD (internal memory)
In NAND mode, press and hold SEL button (15) for about 2 seconds
until "ONE DEL" displays on LCD (17). Use VOL up or down button
(3) to choose ONE or ALL. Press ENT button (9) to confirm selection.
• If ONE DEL is selected: Next track will begin playback after file
deletion has finished.
• If ALL COPY is selected: "DELETING" will display on LCD, then "NO
FILE" will display after deletion process has finished. After that it
would automatically switch to Radio mode.
4. searching File or Folder in usb/nanD
• To Search File In USB or NAND mode: Press AS/PS button (6) once
to enter track searching mode, then press VOL Up/Down button (3)
to scroll through available tracks. At desired track, press ENT button
(9) to confirm selection. Once track is selected, it will automatically
begin to play.
• To Search Folder in USB or NAND mode: Press AS/PS button (6) to
enter folder searching mode. Then press VOL Up/Down button (3) to
scroll through available folders. At desired folder, press ENT button
(9) to confirm selection. Then search your desired file as above
method.
19.6

J-1000 audio system iPod Operation

1. Play iPod
Open front panel (16) and plug an iPod into the iPod Docking Station
(12) as shown. Refer to step 12 (page 84) for details. The iPod will
begin to play automatically. Close front panel. The "iPod" symbol will
display to indicate an iPod is connected.
• To Play connected iPod: Press MODE button (4) to change to iPod
mode. The iPod will play. The display will either show:
A. The current track and play time or
B. The iPod will resume or pick up the last song played prior to docking
it. Please note after a few seconds the stereo display will show
audio information from iPod.
J-400
Page 87