XANTIA - SYNERGIE
AUXILIARY EQUIPMENT DRIVE BELT
Engine : RHY - RHZ
With air conditioning
[1] Belt tension adjusting square
[2] Ø 4 mm peg
[3] Ø 2 mm peg
[4] Dynamic tensioner compression lever
Remove
Re-use of belt
WARNING : Mark the direction the belt was fitted in case of re-use of the same belt.
- Compress the tensioner roller (7) by moving it at «c» (in anti-clockwise direction),
tool [4].
- Hold the tensioner roller (7) compressed and remove the belt.
No re-use of belt.
- Compress the tensioner roller (7) by moving it at «c» (in anti-clockwise direction), tool [4].
- Peg using tool [2], at «d».
- Loosen the screw (6).
- Bring the eccentric roller (5) towards the rear.
- Tighten the screw (6) by hand.
- Remove the belt.
74
Tools
: (-).0188 J2
: (-).0188.Q1
: (-).0188.Q2
: (-).0188.Z
B1BP1YLD