CITROEN XANTIA User Manual page 80

AUXILIARY EQUIPMENT DRIVE BELT
Engine : RHY - RHZ
Refit.
Re-used belt.
- Compress the tensioner roller (2) by action at «a» (in anti-clockwise direction), tool [4].
- Refit the belt.
WARNING : Respect the direction belt was fitted.
- Remove the tool [4].
New belt.
- Refit the belt.
- Turn the eccentric roller (3), tool [1] (clockwise) to free the tool [2] from its pegging at «b».
- Hold the eccentric roller (3), tool [1], and tighten the screw (1) to 4.3 m.daN.
- Remove the tool [2].
- Rotate the crankshaft 4 times in the direction of rotation.
- Check that it is possible to peg at «b», tool [3].
- If not possible to peg, restart the adjustment.
Without air conditioning (continued)
73
XANTIA - SYNERGIE
B1BP1YMD