XANTIA
SETTING THE BOSCH MECHANICAL INJECTION PUMP
Engine : DHX (continued)
CHECKING THE INJECTION PUMP SETTING
- Remove the tool 7017-T.R.
- Rotate the crankshaft by 1/4 of a turn (opposite direction of rotation).
- Rotate the crankshaft (direction of rotation).
- Peg the flywheel.
- In this position, the dial gauge should show the value "X" (See the table on page : 158).
- The value "X" corresponds to the travel of the pump piston in relation to the B.D.C.
- Remove the tool.
B1HP0NQC
B1HP0NPC
160