CITROEN XANTIA User Manual page 180

CLUTCH : CHECKS AND ADJUSTMENTS
Engines : BFZ - LFX - LFY - RFV - RGX - RFN - DHX - RHY - RHZ (Continued)
B2BP03QD
Operation
For the adjusting device to operate correctly, it
is necessary that :
The pedal is at rest (against its upper stop)
The locking sleeve (1) is slightly compressed,
the rollers (2) are free, the outer cable (3) length
may vary.
NOTE : The pedal gear has a non-adjustable assisting device
Clutch disengagement phase
As soon as the pedal is applied, the attaching
end-piece (4) leaves the sleeve (1) which
moves back. The rollers, pushed by spring (5)
jam the system. The cable behaves like a
conventional cable.
173
XANTIA - XM - SYNERGIE
Engagement / adjustment phase
The pedal returns to rest on its upper stop.
Attaching end-piece (4) pushes sleeve (1)
which frees the rollers.
Outer cable (3), kept extended by the spring (6)
becomes :
- Shorter if the clutch disc is worn.
- Longer if the outer cable has been compressed.