Table of Contents
Advertisement
DE-PRESSURISING THE SUSPENSION CIRCUITS (continued)
ESSENTIAL : The height corrector must be operated in the «LOW» position.
Carry out the following operations
Vehicle with or without hydractive suspension - Front axle (With SC.MAC valves)
1
Unscrew the pressure regulator release screw by 1 turn.
Uncouple the pressure inlet pipe (1) from the height corrector.
2
Connect the pump 4135-T or 4034-T - 4146-T.O.
3
Hydractive Vehicle : Switch on the ignition.
SPECIFIC CASES
The suspension can be de-pressurised on each axle individually.
The main accumulator is de-pressurised.
The electrovalves of the hydractive regulators are energised.
255
ALL TYPES
Consequences
B3BP136C
Hide quick links:
Advertisement
Table of Contents
