CITROEN XANTIA User Manual page 228

5 - Arm/shaft fixing 13
6 - Hub/stub fixing 28
7 - Wheel fixing 9
REAR AXLE (continued)
Tightening torques (m.daN)
9 - Front runner mountings oriented at 18°
(marking: notch at ''a'').
10 - Washer
11 - Rubber mounting
ESSENTIAL :
The clearance «J1» should be equal to or
less than 0.5 mm.
It must be obtained using a single shim (8).
Thickness of available shims :
0.5 - 1 - 1.5 mm.
- J1 less than or equal to 0.5 mm
( No shim (8) required).
- J1> 0.5 mm ; less than or equal to 1 mm :
- J1> 1 mm less than or equal to 1.5 mm
- J1> 1.5 mm, fit a 1.5 mm shim.
221
XANTIA
Adjustment of a suspension arm
Selecting the shim thickness (8)
( Fit a 0.5 mm shim).
( Fit a 1 mm shim).
B3DP02GD B3DP02HC