CITROEN XANTIA User Manual page 113

CHECKING AND SETTING THE VALVE TIMING
Engine : XFZ (continued)
- Remove the screw (8).
- Loosen the screw (7) so that the tool [5] can move without any play..
- Wait for 1 minute (Damper action).
- Check that the tool [5] can move without any play.
- Remove the tool [5].
- Tighten the screws (9) to 2.5 m.daN (In the order indicated).
- Remove the screw (7) and the tool [2].
- Rotate the crankshaft by 2 turns (clockwise). (Do not turn backwards).
- Peg the camshafts in the order 4, 3, 2 and 1 as follows :
- Peg [3] ENGAGES : Loosen the camshaft pulley screws by 45°.
- Peg [3] DOES NOT ENGAGE : Loosen the camshaft pulley screws by 45° and turn the hub using the tool [6] until
the peg engages.
- The camshaft pulley screws must not be against the end of the slots.
(Otherwise, repeat the belt fitting operation).
- Tighten the camshaft pulley screws in the following order : 4, 3, 2 and 1. Tighten to 1 m.daN.
- Remove the tools.
- Rotate the engine by 2 turns.
- Check the timing.
SETTING THE VALVE TIMING
106
B1EP102C B1EP09BC