CITROEN XANTIA User Manual page 260

DE-PRESSURISING THE SUSPENSION CIRCUITS (continued)
Carry out the following operations
6 Activate 4 to 5 times alternately the two SC.CAR corrector link rods.
1
Unscrew the pressure regulator release screw by 1 turn.
2 Height control set to «LOW» position.
3
Open the SC.CAR regulator bleed screw.
4
Activate 4 to 5 times alternately the two SC.CAR corrector link rods.
Uncouple the SC.CAR accumulator supply pipe, plug the pipe using
5
the unions 4146-T (M) and (V).
Uncouple the pressure regulator outlet pipe, couple the pipe to the
6
pump 4135-T + 4146-T.S or 4034-T + 4136-T (S) and (O).
Vehicle with SC.CAR, Citroën Active Roll Control, not in running order
253
Consequences
The SC.CAR accumulator is de-pressurised.
The main accumulator is de-pressurised.
The SC.MAC accumulator is de-pressurised.
The SC.CAR regulator accumulator is de-pressurised.
The SC.CAR accumulator is de-pressurised.
ALL TYPES