CITROEN XANTIA User Manual page 195

SYNERGIE
BE4/5 GEARBOX - CHECKS AND ADJUSTMENTS
[1] Tool for positioning the gear lever
ADJUSTMENTS
WARNING : Cables should be adjusted each
time the gearbox, gear controls or power unit
are removed.
Inside the vehicle
- Remove the trim under the gear lever.
- Lock the gear lever in neutral position,using tool [1].
Under the bonnet
- Remove the air filter assembly.
- Unlock the ball-joint keys at «a».
- Place the gear selection and control levers
neutral.
- Lock the cable lengths with the ball-joint locking
keys.
188
Engines : RFN
Adjusting the gear controls.
TOOL
- Remove the tool [1].
- Check that all the gears engage without
«tightness ».
- Check that the gear lever moves identically
forwards and backwards and to right and left. If
it does not, repeat the adjustment.
- Refit the trim under the gear lever.
- Refit the air filter assembly.
: 9607-T.
CHECKS
B2CP3C6C B2CP3C0C