CITROEN XANTIA User Manual page 183

XANTIA - XM - SYNERGIE CLUTCH : CHECKS AND ADJUSTMENTS
Hydraulically operated pull-action clutch (Non-adjustable)
Engines : RGX - XFZ – RHZ - P8C - THY
After fitting on the vehicle, the circuit should be filled with a
«DOT 4» type brake fluid.
Clutch control reservoir capacity 120 cc.
(Bleeding is carried out not under pressure).
Repair
The new clutch control components are not compatible with the
old parts.
Both the old and the new components are marketed by
«Replacement Parts».
Draining-Filling - Top-up
- Check the level after each repair visit.
- Fill the circuit (after drainage), using a filling cylinder
specifically designed for this operation.
- Use the circuit's bleed screw (7).
- The level of fluid inside the clutch control reservoir should be
between the min. and max. marks.
NOTE : Wear on the clutch causes a slight increase in the level
of fluid inside the control reservoir.
B2BP03ZD
176