Introduction; Manufacturer; Warranty; Customer Support - Star Trac SPINNER PRO+ Owner's Manual

I
ntroduction
This manual will acquaint you with the assembly, operation and maintenance of your Spinner

7160 Series - Spinner PRO+ manufactured by STAR TRAC
Be sure to read and follow the information and instructions for your specific model before assembly, using or servicing your indoor cycling
bike.
M
anufacturer
STAR TRAC
4400 NE 77 Avenue, Suite 300
th
Vancouver, WA 98662
Telephone: (800) 228-6635, (714) 669-1660
Fax: (714) 508-3303
http://www.startrac.com
W
arranty
Frame is covered for 10 years from the date of purchase for structural failure. Additionally, the Spinner
(5) years from the date of purchase against build up and propagation of rust. Flywheel Assembly, Brake Knob Assembly, Handlebar
Assembly, Seat Post, and Foot Adjustments are covered for three (3) years from the date of purchase. Handle Bar Post Plastic Sleeve,
Seat Post Plastic Sleeve, Bottom Bracket Assembly, Seat Saddle Assembly, and Pop-Pin Assembly, are covered for two (2) years for the
date of purchase. Pedals, Chain, Brake Pad Assembly, Rubber Frame Guard, Brass Brake Nut and remaining parts are covered for one
(1) year from the date of purchase. An advance warranty replacement kit of wear items is included, consisting of: one (1) brake pad and
two (2) pedal straps.
C
ustomer
If any items need replacement contact the Star Trac Customer Support Department at 800-503-1221 or 714-669-1660.
S I
afety nstructions
This chapter includes precautions and fitness safeguards for the installation and use of the SPINNER PRO+ manufactured by
STAR TRAC. Please read this chapter carefully before installing or using your equipment.
Safety instructions are provided in the following languages (in the order shown):

English

Dutch

French

Italian

Portuguese

Spanish

Swedish

Chinese

Japanese
| SPINNER PRO+ MANUFACTURED by STAR TRAC OWNER'S MANUAL
4
S
upport
®
indoor cycling bike.
®
®
PRO+ frame is warranted for five