Star Trac SPINNER PRO+ Owner's Manual page 16

7. Installing the Handle Bar (Fig. 7)
A. Insert the handle bar assembly post into the front of the
®
Spinner frame tube. Pull on the handlebar height adjustment
pop-pin to lower the handlebar post all the way into the frame.
8. Installing the Seat Post (Fig. 8)
B. Insert the seat post into the rear tube of the Spin bike. Pull on
the seat height adjustment pop-pin to lower the seat post all the
way into the frame.
9. Installing the Seat Slider (Fig. 9)
A. Insert the seat slide into the horizontal tube opening of the seat
post assembly. Pull on the seat slider adjustment pop-pin to
slide the seat post all the way into the vertical seat post.
| SPINNER PRO+ MANUFACTURED by STAR TRAC OWNER'S MANUAL
16
Fig. 7
Fig. 8
Fig. 9