Mounting The Switch On A Rack; Figure 7 Mounting The Switch On A Rack - ZyXEL Communications ES-1528 User Manual
Zyxel es-1528 ethernet switch user's guide
Hide thumbs
Also See for ES-1528:
- Support notes (9 pages) ,
- Specifications (4 pages) ,
- Sales manual (7 pages)
Table of Contents
Advertisement
2 Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting
bracket holes into the switch.
3 Repeat steps
switch.
4 You may now mount the switch on a rack. Proceed to the next section.
2.2.3 Mounting the Switch on a Rack
1 Position a mounting bracket (that is already attached to the switch) on one side of the
rack, lining up the two screw holes on the bracket with the screw holes on the side of the
rack.
Figure 7 Mounting the Switch on a Rack
2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting
bracket holes into the rack.
3 Repeat steps
ES-1528 User's Guide
1
and
2
to install the second mounting bracket on the other side of the
1
and
2
to attach the second mounting bracket on the other side of the rack.
Chapter 2 Hardware Installation and Connection
33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
