Mounting The Switch On A Rack - ZyXEL Communications GS1100-16 User Manual

Chapter 2 Hardware Description and Connection
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.
Failure to use the proper screws may damage the unit.
Precautions
• Make sure the rack will safely support the combined weight of all the equipment it contains.
• Make sure the position of the Switch does not make the rack unstable or top-heavy. Take all
necessary precautions to anchor the rack securely before installing the unit.
Attaching the Mounting Brackets to the Switch
Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket
1
with the screw holes on the side of the Switch.
Figure 12 Attaching the Mounting Brackets (GS1100-16 and GS1100-24E)
Figure 13 Attaching the Mounting Brackets (GS1100-24)
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
2
into the Switch.
Repeat steps
3
You may now mount the Switch on a rack. Proceed to the next section.
4

2.3.3 Mounting the Switch on a Rack

Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
1
up the two screw holes on the bracket with the screw holes on the side of the rack.
16
1 and 2 to install the second mounting bracket on the other side of the Switch.
GS1100 Series User's Guide