Configure Ip Address; Level 2 (L2) Table Aging; Figure 20 Configure Ip Address; Table 6 Configure Ip Address - ZyXEL Communications ES-1528 User Manual

Chapter 5 System
Table 5 System (continued)
LABEL
L2 Table Aging
Backup settings Click this link to create and save a backup configuration file. See
Restore
settings

5.1.1 Configure IP Address

Use the Configure IP Address screen to set up the IP address manually. The following screen
appears when you click the existing IP address in the System > Status screen.

Figure 20 Configure IP Address

The following table describes the labels in this screen.

Table 6 Configure IP Address

LABEL
IP Address
Network Submask
Gateway

5.1.2 Level 2 (L2) Table Aging

L2 Table Aging defines the aging time of the Address Resolution Logic (ARL) table. This
table learns and remembers MAC addresses of devices sending information through it. See
Chapter 13 on page 83
field to see the screen as shown next.
50
DESCRIPTION
This field displays whether the L2 Table Aging is enabled or disabled. Click
Enabled/Disabled to change the L2 Table Aging settings.
page 51.
Click this link to upload an existing configuration file to the switch. See
on page 51.
DESCRIPTION
Enter the IP address of your switch in dotted decimal notation.
For example, 192.168.1.1.
Enter the IP subnet mask of your switch in dotted decimal
notation for example 255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted
decimal notation, for example 192.168.1.5.
for more background information. Click the link in the L2 Table Aging
Section 5.1.3 on
Section 5.1.4
ES-1528 User's Guide