Snmp User - Modify; Figure 64 Snmp User - Modify; Table 44 Snmp User - Create; Table 45 Snmp User - Modify - ZyXEL Communications ES-1528 User Manual

The following table describes the labels in this screen.

Table 44 SNMP User - Create

LABEL
User Name
Group Name
SNMP Version
Auth Type
Key
Create
Cancel

18.3.2 SNMP User - Modify

Click on the User ID number or select a User ID from the User ID drop down list box in the
SNMP User screen to modify the settings of an existing user.

Figure 64 SNMP User - Modify

The following table describes the labels in this screen.

Table 45 SNMP User - Modify

LABEL
User ID
User Name
Group Name
SNMP Version
Auth Type
ES-1528 User's Guide
DESCRIPTION
Specify the name for this SNMP user.
Specify the SNMP group this user belongs to.
Specify the SNMP version this group uses to manage the switch.
Authentication can only be configured for SNMP v3.
Select None to allow this user to manage the switch without authentication or select
MD5 and configure the Key field to force this user to authenticate with the switch.
Enter the MD5 key this user must use to authenticate with the switch.
Click this to add this SNMP user to the switch.
Click this to go back to the main SNMP Group screen without saving your changes.
DESCRIPTION
This field indicates which user you are modifying.
Click on Remove This User to delete this user configuration from the switch.
Click on Display All User to view the main SNMP User screen.
Edit the name for this SNMP user.
Select the SNMP group this user should belong to.
Specify the SNMP version this group uses to manage the switch.
Authentication can only be configured for SNMP v3.
Select None to allow this user to manage the switch without authentication or select
MD5 and configure the New Key field to force this user to authenticate with the
switch.
Chapter 18 SNMP
111