Level 2 (L2) Management; Chapter 13 Level 2 (L2) Management; Configuring L2 Management; Figure 45 L2 Management - ZyXEL Communications ES-1528 User Manual

C
H A P T E R

Level 2 (L2) Management

Use these screens to add, delete and view entries in the Level 2 (L2) address table.

13.1 Configuring L2 Management

Level 2 (L2) management refers to management based on the Media Access Control (MAC)
address of networking devices. A static Media Access Control (MAC) address is an address
that has been manually entered in the MAC address table. Static MAC addresses do not age
out. When you set up static MAC address rules, you are setting static MAC addresses for a
port. This may reduce the need for broadcasting.
Click L2 Address > Management in the navigation panel to display the configuration screen
as shown.

Figure 45 L2 Management

The following table describes the labels in this screen.

Table 25 L2 Management

LABEL
Address
Lookup:
Static
Address:
ADD
Item
Source MAC
VID
ES-1528 User's Guide
DESCRIPTION
Enter the MAC address and the corresponding Vlan ID in the MAC and VID fields
respectively. Click Lookup to search for the MAC address entry in the MAC address
table.
This section allows you to add or delete static MAC address entries.
Click this to add a static MAC address entry to the MAC address table.
This is the index number of the static MAC address entry.
This field displays the MAC address of a manually entered MAC address entry.
This field displays the VID of a manually entered MAC address entry.
13
83