Snmp User - Create; Figure 62 Snmp User; Figure 63 Snmp User - Create; Table 43 Snmp User - ZyXEL Communications ES-1528 User Manual

Chapter 18 SNMP

Figure 62 SNMP User

The following table describes the labels in this screen.

Table 43 SNMP User

LABEL
User ID
Create New
User
User ID
User Name
Group Name
SNMP Version
Auth Type
Previous Page/
Next Page

18.3.1 SNMP User - Create

Click on the Create New User link in the SNMP User screen to add an SNMP user. The
screen displays as shown.

Figure 63 SNMP User - Create

110
DESCRIPTION
Select the SNMP user you want to edit.
Click this to configure a new SNMP user.
This field indicates the user number. It is used for identification only. Click on the
individual user number to edit the user settings.
This field displays the name of the SNMP user.
This field displays the name of the SNMP group the user belongs to.
This field indicates which SNMP version this user uses to manage the switch.
This field indicates whether authentication is required for this user. Authentication
can only be configured for SNMP v3. This field displays None if no authentication is
required for this user or it displays MD5 if Message Digest authentication is enabled.
Use these navigation links to browse all of your SNMP groups.
ES-1528 User's Guide