Rmon Event Log : Overview; Rmon Event Log : Event; Figure 82 Rmon Event Log : Overview; Table 63 Rmon Event Log : Overview - ZyXEL Communications ES-1528 User Manual

Chapter 19 RMON-Lite
Table 62 RMON Event Configuration Screens (continued)
LABEL
Owner
Apply
Event Overview Click this to go to the RMON Event : Overview screen.

19.7 RMON Event Log : Overview

Use the RMON Event Log : Overview screen to view the event log entries generated on the
switch. All the entries in this table are generated by the RMON-Lite probe when the event
value meets the risingEventThreshold or fallingEventThreshold assigned in the RMON
Alarm screens.
Select [9] Event Log in the RMON MIB Table: drop down list box in any RMON Lite
screen to view the screen as shown.

Figure 82 RMON Event Log : Overview.

The following table describes the labels in this screen.

Table 63 RMON Event Log : Overview

LABEL
RMON MIB
Table:
Refresh
Event Index
Event Type
Last Time Sent
Owner

19.7.1 RMON Event Log : Event

Use the RMON Event Log : Event screen to view the details of existing RMON event log
entries. Click on the specific Event Index numbers in the RMON Event Log : Overview
screen to view the screen as shown.
130
DESCRIPTION
Enter a descriptive name of the application that creates this entry. You can use 1-64
printable ASCII characters. Spaces are not allowed.
Click this to save the settings to the switch.
DESCRIPTION
Use this drop down list box to select the MIB table you want to view. Click Apply to
refresh the screen to the selected MIB table view.
Click this to update all the fields in the RMON Event Log : Overview screen.
This field displays an event index number.
This field displays the action taken when this event occurred: None, Log, Trap, or
Log and Trap.
This field indicates the value of system up time on the switch when this event was
last generated. It appears in the following format "XXD: XXH: XXM: XXS", where
"XX" stands for a number and "D" stands for days, "H" for hours, "M" for minutes and
"S" for seconds.
This field displays the entry creator. It displays "monitor" if the entry was created by
the switch itself.
ES-1528 User's Guide