File Name Entry - Kyocera 6500i Operation Manual

File Name Entry

This setting allows you to assign a document name to scanned images. A job number and the date and time can
be added. You can specify a default for the document name.
Use the procedure below to assign names to scanned documents that you are sending.
File Name Entry
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name
doc
Additional Info
[ Date and Time ]
Date and Time
Job No.
Add Shortcut
Status
1
2
3
4
Destination
Cancel OK
10/10/2010 10:10
5
NOTE:
document name.
6
7
8
6-28
Press the Send key.
Place the originals on the platen.
Press [Advanced Setup] and then [File Name
Entry].
Press [File Name].
Enter the document name, and press [OK].
Up to 32 characters can be entered for the
Press [Job No.] to enter the job No., and [Date and
Time] to enter the date and time.
Press [OK].
Specify the destination, and press the Start key to
start sending.
Sending Functions