Paper Selection - Kyocera 6500i Operation Manual

Original Size
X
Standard
Sizes 1
Standard
Sizes 2
Others
Y
Size Entry
Original : 210x297mm
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status

Paper Selection

Select the paper source that contains the required paper size.
NOTE:
Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper
Settings on page 9-4).
When printing on paper that is wider than the paper previously used, dirt on the conveying guide may soil the
edges of the paper infrequently. If you find that the paper is soiled, use the provided cleaning cloth to clean the
conveying guide. (refer to Conveying Guide on page 11-14)
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
Paper Selection
Auto
Cassette
A4
Plain
A3 A4
Plain Plain
:
Original A4
A4 A4
Zoom : 100%
Plain Plain
:
Paper A4
A4 A4
Preview
Plain Plain
Add Shortcut
Status
Copies
(50 - 432)
297
mm
5
# Keys
(50 - 297)
6
210
mm
# Keys
Cancel OK
10/10/2010 10:10
1
2
3
4
Copies
MP Tray
5
MP Tray
6
Paper Set.
Cancel OK
10/10/2010 10:10
4-3
If [Size Entry] is selected, press [+] or [-] to specify
the horizontal size (X) and the vertical size (Y).
Press [# Keys] to enter the size directly using the
numeric keys.
Press [OK].
Press the Start key to start copying.
Press the Copy key.
Place the originals on the platen.
Press [Org./Paper/Finishing] and then [Paper
Selection].
Press the key of the paper source corresponding to
the required paper size. The cassette in which the
paper is loaded is selected.
If [Auto] is selected, the paper matching the size of
the original is selected automatically.
Press [OK].
Press the Start key to start copying.
Copying Functions
4