Button Mapping - Nortel T7406E Installation And Configuration Manual

Appendix C

Button mapping

You can map the feature buttons on your set after configuring your handset.
The handsets have six feature buttons. These buttons can be programmed by your system
administrator. You can also program the buttons from your handset. The following section
describes the usual mapping of the buttons, based on the M7310 telephone button mapping. The
illustration below shows examples of the default button mapping for the handset.
Figure 16 T7406E cordless handset
The following three illustrations show the correlation between the T7406E handset buttons and the
M7310, T7316 and T7316E telephones, which are standard telephones used for Norstar and
Business Communications Manager systems.
Line 1
Line 2
Call Fwd
T7406E Cordless Handset Installation and Configuration Guide
Last No.
Voice Call
Intercom
55