Charging The Battery Pack For The First Time - Nortel T7406E Installation And Configuration Manual

4 Replace the battery compartment cover.

Charging the battery pack for the first time

Warning: It is imperative that you follow the steps in this section when you first
initialize a base station and configure the first handset.
You must fully charge the rechargeable battery pack before you use your T7406E handset for the
first time.
1 Slide the handset into the charger, making sure the handset and charger contacts touch.
Charging begins as soon as the handset is placed in the charging cradle. The logo at the front
of the charging cradle lights up to indicate that the handset is properly seated and charging.
2 Allow the battery pack to charge for a minimum of three hours.
Chapter 3 Installing the base telephone equipment
T7406E Cordless Handset Installation and Configuration Guide
37