26
Chapter 2 Introduction
Base station features
When you connect the power source to the base station, the base station status LED starts flashing
green. During operation, the LED flashes every second to indicate that the base station is receiving
power.
Figure 4 on page 27
You can use the mounting bracket to install the base station on a wall or on the ceiling (see
5 on page
27).
Figure 3 Base station
Base station
antennas
(90° to base
station)
NN40110-301
NN40110-301
shows the location of the LEDs.
LED indicates base
station has power
LEDs indicate
handset status
Figure