Check The Safety System - Jonsered FR2216MA Operator's Manual

Check the safety system

The machine is equipped with a safety system that prevents
starting or driving under the following conditions.
The engine should only be possible to start when the cutting
unit is in its raised position and the gear shift lever or hydrostat
pedals are in the neutral position.
The driver does not need to be seated in the driver's seat.
Make daily inspections to ensure that the safety system works
by attempting to start the engine when one of the conditions
is not met. Change the conditions and try again.
Check that the engine stops if you temporarily move out of the
driver's seat while the cutting unit is lowered or the gear shift
lever/hydrostat pedals are not in the neutral position.
26 –
English
Maintenance
Start motor
Ignition system
Works
Does not work