Check The Safety System - Jonsered FR2211R Operator's Manual

Maintenance

Check the safety system

The machine is equipped with a safety system that prevents starting or driving under the following conditions.
The engine should only be possible to start when the cutting unit is in its raised position and the gear shift lever or hydrostat pedals
are in the neutral position.
The driver does not need to be seated in the driver's seat.
Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not
met. Change the conditions and try again.
Check that the engine stops if you temporarily move out of the driver's seat while the cutting unit is lowered or the gear shift lever/
hydrostat pedals are not in the neutral position.
Start motor
Ignition system
Works
Does not work
For FR 2211 R and FR 2211 M
For FR 2213 MA, FR 2216 A and FR 2216 A2
– 27
English