Jonsered FR2216MA Operator's Manual page 24

FR 2216MA 4X4, FR 2218A 4X4
1 Open the engine cover.
2 Pull up the handle on the air filter cover, unhook and turn
towards the engine.
3 Remove the air filter cover.
4 Lift out the air filter cartridge from the fan housing.
Replace the air filter cartridge, if clogged with dirt.
IMPORTANT INFORMATION
Do not use compressed air to clean the paper filter.
The filters must not be oiled. They must be fitted dry.
5 Carefully lift the precleaner out of the fan housing.
Carefully clean the fan housing so that dirt does not fall
down into the carburettor.
6 Insert a new precleaner and air filter cartridge in the fan
housing.
7 Align the tabs on the cover with the slits in the housing and
replace the air filter cover.
24 –
English
Maintenance
8 Pull the handle outwards. Secure the handle in the air filter
cover and close the cover by pressing it inwards.
FR 2216A2 4X4
1 Open the engine cover.
2 Loosen the fasteners on the sides of the air filter cowling
and remove the cowling.
3 Unscrew the knob in the centre of the filter cartridge and
remove the filter holder.
4 Carefully remove the pre-cleaner from the cartridge.
Replace the pre-cleaner with a new one.
5 Lift out the air filter cartridge from the fan housing.
Replace the air filter cartridge, if clogged with dirt.
6 Clean the filter by knocking the filter against a flat surface.
Never use solvent with petroleum, for example, kerosene,
or compressed air to clean the filter.
IMPORTANT!
Do not use compressed air or solvent with petroleum to
clean the cartridge.
The filters must not be oiled. They must be fitted dry.
7 Carefully clean the fan housing so that dirt does not fall
down into the carburettor.
8 Fit the filter cartridge, filter holder and then screw on the
knob.
9 Slide the pre-cleaner over the cartridge.
10 Fit the filter cowling