Table of Contents
Advertisement
Quick guide
Before turning on the power
Standard
DIN45325 plug
(IEC 169-2) 75 q
coaxial cable
Supplying power to the antenna
You must supply power to the antenna in order to
receive digitally/terrestrially broadcast stations after
connecting the antenna cable to the antenna input
terminal on the back of your TV.
1
Press MENU and the "MENU" screen displays.
Press c/d to select "Setup".
2
Press a/b to select "Antenna Setup-DIGITAL", and
3
then press OK.
Press a/b to select "Supply Voltage", and then press
4
OK.
Press c/d to select "On", and then press OK.
5
Setting the TV on the wall
•
This TV should be mounted on the wall only with the wall mount bracket available from SHARP.
(Page 39) The use of other wall mount brackets may result in an unstable installation and may cause
serious injuries.
•
Installing the LCD Colour TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
•
You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
•
To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
•
When you mount the TV on the wall, you should attach the supporting post.
Bundling the cables
Bundle the cables with
8
Cable clamp
the clamp.
1
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
2
The logo on the CI
Module must be
facing forward from
the rear of the TV.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC cord
Product shape varies in some countries.
Advertisement
Table of Contents
