Configuring Ip Address And Password For The Switch - KTI Networks KFS-2621 User Manual

P25 & P26
LINK/Act Port link status
(Green)
1000M Port speed status
(Yellow)
F25 LINK Port link status
F26 LINK Port link status

3.4 Configuring IP Address and Password for the Switch

The switch is shipped with the following factory default settings for software management:
IP address of the switch: 192.168.0.2 / 255.255.255.0
Default
The IP Address is an identification of the switch in a TCP/IP network. Each switch should be designated a new
and unique IP address in the network. Refer to Web management interface for System Configuration.
The switch is shipped with factory default password 123 for software management.
The password is used for authentication in accessing to the switch via Http web-based interface. For security
reason, it is recommended to change the default settings for the switch before deploying it to your network.
Refer to Web management interface for System Configuration.
ON P25 & P26 copper port link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
ON P25 & P26 copper port 1000Mbps is selected.
OFF P25 & P26 copper port 10 or 100Mbps is selected.
ON P25 SFP fiber link is established.
OFF Port link is down.
ON P26 SFP fiber link is established.
OFF Port link is down.
-22-