Connecting Fiber Cables
LC connectors are commonly equipped on most SFP transceiver modules. Identify TX and RX connector
before making cable connection. The following figure illustrates a connection example between two fiber
ports:
Make sure the Rx-to-Tx connection rule is followed on the both ends of the fiber cable.
Network Cables
Multimode (MMF) - 50/125Pm, 62.5/125 Pm
Single mode (SMF) - 9/125 Pm
Fiber Port Configuration
For 1000M fiber application on Port 25 and Port 26, just leave the default port configuration Auto for fiber
connection.
-20-