Link Aggregation - KTI Networks KFS-2621 User Manual

4.23 Link Aggregation

Configuration
System Priority
Link Aggregation Algorithm
[Apply]
Member
Link Group 1
Link Group 2
Link Group 3
State
Type
Operation Key
Description
Determines which switch in an LACP link controls port priorities
MAC Source – use MAC SA as base to hash to a member port for packet forwarding
MAC Src&Dst - use MAC SA & DA as base to hash to a member port for packet forwarding
Click to apply the configuration change
Member ports of Link Group x (Trunks)
Trunk group 1, valid member ports: P1, P2, P3, P4
Trunk group 2, valid member ports: P5, P6, P7, P8
Trunk group 3, valid member ports: P25, P26
Disable – The Link Group is disabled.
Enable – The Link Group is enabled.
Static – The type of link aggregation mechanism is static and proprietary.
LACP – LACP-compliant mode (IEEE 802.3ad)
An integer value assigned to the port that determines which ports are
-57-