Sign in today to find solutions:

Don't have an account? Sign up

KTI Networks KS-115F Series Installation Manual

Kti networks ethernet switch installation guide.

 
10/100 Fast Ethernet Switch
KS-115F Series

Summary of Contents

  • Page 1

    10/100 Fast Ethernet Switch KS-115F Series...

  • Page 3

    TRADEMARKS CISPR A COMPLIANCE: CE NOTICE...

  • Page 5

    1. Introduction...

  • Page 6

    1.1 Features...

  • Page 7

    1.2 Specifications Models vs Fiber Specifications Model Connector KS-115F/T KS-115F/C KS-115F/SA KS-115F/S3 KS-115F/S5 KS-115F/JM KS-115F/JS KS-115F/VM KS-115F/VS *1 : Multimode fiber *2 : Single Mode fiber Fiber Cable MT-RJ MT-RJ VF-45 VF-45 Max. Distance 2 Km 2 Km 15 Km 30 Km 50 Km 2 Km...

  • Page 8

    2. Installing the Switch 2.1 Unpacking 2.2 Checking AC Power...

  • Page 9

    2.3 Installing the Switch...

  • Page 10

    3. Making Network Connections 3.1 Network Switched Ports...

  • Page 11

    3.2 UTP Cable CONNECTED DEVICE UTP CABLE USED & MAXIMUM LENGTH 10BASE-T device 100BASE-TX device Cat. 3, 4, 5 UTP (100 meters) Cat. 5 UTP (100 meters)

  • Page 12

    3.3 Fiber Cables Model Connector KS-115F/T KS-115F/C KS-115F/SA KS-115F/S3 KS-115F/S5 KS-115F/JM MT-RJ KS-115F/JS MT-RJ KS-115F/VM VF-45 KS-115F/VS VF-45 *1 : Multimode fiber cable *2 : Single Mode fiber cable *3 : The maximum distance connecting to a full duplex device Wavelength Cable Max.

  • Page 13

    3.4 Network Connections...

  • Page 14

    3.5 Operating Mode Connected Device 10BASE-T hub 100BASE-TX hub Auto-negotiation device Non-auto*1 half-duplex device Non-auto full-duplex device *1 Non-auto : non-auto-negotiation *2 determined through auto-negotiation process *3 speed is determined by auto-sensing function Connected Device Network card Network card Class I hub 2 Class II hubs Switched fiber port Switched fiber port...

  • Page 15

    4. LED Indicators 4.1 LED Panel 4.2 Interpretation STATE Power Power 10/100 10/100 Link/Act. Link/Act. Link/Act. Blink FDX/Col FDX/Col FDX/Col Blink INDICATION No power is supplied to the device. Power is supplied to the device. 10Mbps is used. 100Mbps is used. No active cable link An active link is established.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: