KTI Networks KFS-2621 User Manual page 28

Configuration
MAC Address
Number of Ports
System Version
Password
Confirm Password
1
Name *
Contact
Location
IP Address
Subnet Mask
Default Gateway
IP Configuration Mode Static – Use the above configured IP settings
[Apply]
Note:
1. It is suggested to give each switch unit a system name as an alternative unique identification beside IP
address.
2. Setting change of DHCP mode takes effective in next boot-up.
Description
The MAC address factory configured for the switch
It can not be changed in any cases.
The number of LAN ports equipped in the switch
Vx.xx
Set new password
Re-enter the new password
Set the system name for this switch unit
Contact person in case of any problem with this switch unit
Location where this switch unit is located
Configured IP address for the switch management
Configured subnet mask for IP address for the switch management
Configured gateway IP address for the switch management
2
DHCP * - Use DHCP to get dynamic IP address configuration for the switch
Click to apply the configuration change
-28-