Table of Contents
Advertisement
Prefix
Gateway
VLAN ID
Save
Reset
3.4 Configuring IP Address via console and telnet
IP command group.
IP Configuration related commands:
>IP DHCP [Enable|disable]
>IP Setup [<ip_addr>][<ip_mask>][<ip_router>][<vid>]
>IP DNS [<ip_addr>]
>IP DNS_Proxy [Enable|disable]
but it can only appear once. It also used a following legally IPv4 address. For
example, '::192.1.2.34'.
Provide the IPv6 Prefix of this switch. The allowed range is 1 through 128.
Provide the IPv6 gateway address of this switch. IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separates
each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can only appear once. It also used a following legally IPv4
address. For example, '::192.1.2.34'.
Provide the managed VLAN ID. The allowed range is
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-34-
1
4095
through
.
Advertisement
Table of Contents
