KTI Networks KFS-2621 User Manual page 26

Configuration
System Configuration
Port Configuration
Port Mirroring
Bandwidth Control
Broadcast Storm Control Broadcast Packet Storm protection control configuration
VLAN Mode
VLAN Member
Multi to 1 VLAN Setting Special "Multi to 1" VLAN application setting
QoS Priority Mode
Port, 802.1p, IP/DS based QoS port-based, 802.1p-based, IP/DS-based settings
TCP/UDP Port Based
MAC Address Binding Static MAC address configuration associated to each port
TCP/UDP Filter
STP Bridge Settings
STP Port Settings
Link Aggregation
Miscellaneous
Monitoring
Port Counter
Maintenance
Backup/Recovery
Reboot System
Restore Default
Update Firmware
Logout
Switch information, system and IP related settings
Port link status, port operation mode configuration
Port mirroring related configuration
Port Tx rate Rx rate control
VLAN related configuration
VLAN group member settings
Quality of Service priority configuration
TCP/UDP port number based QoS control
TCP/UDP protocol-based filtering
STP/RSTP bridge configuration
STP/RSTP per port configuration
Port link aggregation (port trunk) related configuration
Configurations of Packet aging time, IGMP snooping, VLAN striding, VLAN uplink
ports
List statistics for all ports
Backup switch's current configuration
Upload a saved configuration file to the switch
Command to reboot the switch
Command to restore the switch with factory default settings
Command to update the switch firmware
Command to logout from the switch management
-26-