Table of Contents
Advertisement
BKG Color
3.1.1 Transition Type
The SE-500MU provides two types of transition effect, which are cross dissolve (MIX) and WIPE. The
default setting is MIX.
3.1.2 Transition Speed
The Transition Speed allows the user to set the MIX or WIPE effect duration, in frames. Simply slide
the Transition Speed bar to set the transition speed and the parameter value will be displayed in the
text box next to the slider.
3.1.3 Wipe Effect
On the SE-500MU, there are three wipe effects available for the user to choose. The three wipe
effects are LEFT RIGHT, TOP BOTTOM and CENTER. The default is LEFT RIGHT.
3.1.4 WIPE Border Size
The WIPE Border Size generally allows the user to select an appropriate border width. Setting the
WIPE Border Size to OFF turns the border off. Setting this parameter to small selects a thin border;
middle will yield a medium size width; large is the maximum wipe border width.
3.1.5 WIPE Border Color
In this option, you will be allowed to select a color for your wipe border. The available colors are listed
as follows:
• White
• Yellow
• Cyan
• Green
• Magenta
• Red Blue
• Black
3.1.6 BKG Color
In this option, you will be allowed to assign a color to the BKG button. The available colors are listed
as follows:
• White
• Yellow
• Cyan
• Green
• Magenta
Red
Blue
Black
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
21
White
Advertisement
Table of Contents
