Flame Characteristics - Vermont Castings Intrepid INDVRCB Homeowner's Installation And Operating Manual

Turn
counterclockwise
to increase
flame height
Fig. 64 Flame adjustment knob for SIT valve.
FP390
FLAME ADJUSTMENT KNOB
11/21/96
PSE Pilot
LG500
Fig. 65 Correct pilot and burner flame patterns.
Extension Knobs
On/Off and Hi/Lo control knob extensions have been in-
cluded in the finish bag. These may be installed on the
appropriate knob by aligning the notch on the existing
knob (Fig. 62) with the tab on the inside of the exten-
sion knob (Fig. 66) Push the extension knob as far as it
will go onto the existing knob.
20012761
Turn clockwise
to decrease
flame height
ST233
ST233
pilot
12/9/99 djt
Intrepid® Direct Vent - Rear Vent Gas Heater

Flame Characteristics

It is important to periodically perform a visual check
of the pilot and the burner flames. Compare them to
Figure 65.
If any of the flames appear abnormal call a service
person.
SIT Pilot
CO105d
Pilot flame
6/07 djt
Tab - align with notch
on existing knob
Fig. 66 Extension knob.
CO105d
St972
31