Denso WAVE BHT-805BWB User Manual page 95

Select "3: BHT-Ir Protocol" at the PROTOCOL TYPE menu to display the
screen on the right.
Enter the ID number of the BHT using the numerical keys and then press
the ENT key. If there is no need to edit the current setting, press the ENT
key only.
ID numbers should consist of a five-digit decimal character string. The entry range is from
- Point -
00001 to 65534. If the entry value is less than five digits, the ENT key will be invalid.
If an incorrect entry is made, press the BS/C key to delete it and then enter
the correct data.
Press the BS/C key to return to the SET COMMUNICATION menu.
Barcode Handy Terminal
79