Denso WAVE BHT-805BWB User Manual page 190

BHT-805BWB
EAP TYPE
This is the EAP authentication method setting used for 802.1x authentication.
Select PEAP or EAP-TLS.
This is valid only when the Security mode is 1x Supplicant, WPA-1x or WPA2-1x.
IDENTITY
This is the user ID used for 802.1x authentication.
A format that includes the domain name (<domain name>\<user name>) may be specified for the identity.
An identity, including the domain name, may be specified up to 32 bytes. The domain name may be
omitted.
PASSWORD
This is the password used for 802.1x authentication.
This is valid only when the EAP TYPE is PEAP.
ROOT CERTIFICATE
This setting is for the filename of the root certificate used for 802.1x authentication.
CLIENT CERTIFICATE
This setting is for the filename of the client certificate used for EAP-TLS authentication.
ANONYMOUS IDENTITY
This is the setting for the ID transmitted by EAP Request (ID) packet when performing PEAP
authentication.
WPA CIPHER
This is the setting for the encryption method used when specifying WPA.
Select TKIP or AES.
PRE SHARED KEY
This is the setting for the key used for WPA-PSK or WPA2-PSK.
Always set when the Security mode is WPA-PSK or WPA2-PSK.
174