Denso WAVE BHT-805BWB User Manual page 91

Use the following procedure if necessary to change the communication environment settings.
1.
Select "5: COMMUNICATION" at the SET SYSTEM menu and
then press the ENT key.
The SET COMMUNICATION menu screen on the right displays.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to
highlight the item to be set and press the ENT key.
"1: OPTICAL":
Changes the infrared communication parameters.
"2: PROTOCOL TYPE":
Changes the communication protocol setting.
Refer to the following section for details of the above items.
Press the BS/C key to return to the SYSTEM MENU.
"1: OPTICAL": Infrared communication parameters
1.
Select "1: OPTICAL" at the SET COMMUNICATION menu and
then press the ENT key.
The SET OPTICAL menu screen on the right displays.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to
highlight "1: PARAMETER" or "2: PROTOCOL", and then press
the ENT key.
Press the BS/C key
"1: PARAMETER": Setting the communication parameters
Select "1: PARAMETER" to display the screen shown on the right.
The highlighted setting will be the current setting.
"1: TRANSMIT SPEED": Setting the transmission speed
To change the setting, highlight the transmission speed with the cursor
keys ([◄] [►]) and press the ENT key.
Press the BS/C key to return to the OPTICAL menu.
to return to the SET SYSTEM menu.
Barcode Handy Terminal
75