Denso WAVE BHT-805BWB User Manual page 124

BHT-805BWB
[9] PING test
Use the following procedure to perform a PING test.
1.
Select "9: PING" at the TEST menu and then press the ENT key.
The TEST PING screen displays as shown on the right.
"1: RUN PING":
"2: SET PING":
"3: SET DEVICE":
Refer to the following section for details of the above items.
Press the BS/C key to return to the TEST menu.
"1: RUN PING" (PING Test Screen)
1.
Select "1: RUN PING" at the TEST PING menu and then press the
ENT key.
The current setting values display, and the BHT waits for the transmission
count to be entered.
To change the number of echo requests displayed, enter the desired value
using the numerical keys.
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key
simultaneously.
2.
Press the ENT key.
When the PING test starts running, the message shown on the right
displays.
Press the BS/C key to abort the PING test.
108
Runs the PING test.
Displays the PING parameter setting screen.
Displays the PING device setting screen.