Denso WAVE BHT-805BWB User Manual page 157

Setting up the Bluetooth
1.
Select "2: SET BLUETOOTH" in the BLUETOOTH MENU and
then press the ENT key.
The SET BLUETOOTH menu is desplayed.
[1: DEVICE]:
[2: INQUIRY]:
[3: MASTER]:
[4: SLAVE]:
[5: SPP PARAMETER]:
Refer to the following sections for each of the above menus.
Press the Backspace/clear key to return to the BLUETOOTH MENU.
Setting up the device name
1.
Select "1: DEVICE" in the SET BLUETOOTH menu and then
press the ENT key.
The current setting is displayed.
[1: DEVICE NAME]:
Press the Backspace/clear key to return to the SET BLUETOOTH
menu.
2.
Press the ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys and the dot key to enter the Bluetooth
®
The Bluetooth device name can be up to 16 characters long. The default setting is DENSO-BHT.
To swicth the entry mode (between numeric and alphabet entries), press the SF key.
Refer to "Chapter 5 Communication" – "5.3 Bluetooth
name.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
®
parameter
Sets up the device.
Sets up the device detection.
Sets up the master station.
Sets up the slave station.
Sets up the protocol options for transferring files via the serial port profile.
®
Sets up the Bluetooth device name.
Barcode Handy Terminal
®
device name.
®
wireless communications" for the Bluetooth
®
device
141