Denso WAVE BHT-805BWB User Manual page 142

BHT-805BWB
Wireless Security None Mode
WEP can be used with the Wireless security None mode.
To enable WEP, WEP and WEP KEY settings are required.
The first WEP KEY setting is the encryption key, which can be set from WEP KEY 1 to 4.
After setting the encryption key, the encryption key used is specified by setting the TRANSMIT KEY.
Refer to "Chapter 5 Communication" – "5.2 Wireless Communication" for details of the WEP KEY and
TRANSMIT KEY.
1.
Select "2: CONFIGURATION" in the SET SECURITY menu and
then press the ENT key.
The screen on the right is displayed.
[1: WEP OPTION]:
[2: WEP KEY1]:
[3: WEP KEY2]:
[4: WEP KEY3]:
[5: WEP KEY4]:
[6: TRANSMIT KEY]: TRANSMIT KEY settings
Press the BS/C key to return to the SET SECURTIY menu
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
WEP OPTION], and then press the ENT key.
The screen on the right is displayed.
[1: WEP]:
[2: AUTHENTICATE]:
3.
Press the ENT key or BS/C key to return to the SECURITY CONFIG menu.
126
WEP option settings
WEP KEY 1 settings
WEP KEY 2 settings
WEP KEY 3 settings
WEP KEY 4 settings
Selects whether to enable or disable WEP.
The highlighted setting is the current setting.
Selects open system settings or shared key
authentication.
Select shared key authentication.
The highlighted setting is the current setting.