Denso WAVE BHT-805BWB User Manual page 159

Setting up the master station
1.
Select "3: MASTER" in the SET BLUETOOTH menu and then
press the ENT key.
The current settings are displayed.
[1: PEER BD_ADDR]: Sets up the remote device address of the
[2: PASSKEY]:
[3: TIMEOUT]:
[4: SECURITY]:
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select the menu and then press
the ENT key.
Entry mode is activated and the cursor is displayed.
To set up the "4: SECURITY", use the cursor keys ([◄] [►]) to highlight and set the desired setting.
3.
Use the numeric and period (.) keys to enter the desired value.
"PEER BD ADDR";
"PASSKEY":
"TIMEOUT";
®
For the Bluetooth passkey and the security mode details, refer to "Chapter 5 Communication" – "5.3
®
Bluetooth wireless communications".
To switch the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key to return the SET BLUETOOTH menu.
connection target.
®
Sets up the Bluetooth passkey for the master
station
Sets up the timeout period in seconds.
Sets up the security mode for the master station.
12-digit hexadecimal numbers only
The ENT key is not available until the twelfth digit is entered.
Up to 16 characters
Valid Range: 1–255, Default: 30 seconds
Barcode Handy Terminal
143