Denso WAVE BHT-805BWB User Manual page 149

13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1: CIPHER MODE]:
14.
Ensure that [1: CIPHER MODE] is highlighted and then select
TKIP or AES.
Select TKIP to use TKIP.
Select AES to use AES.
15.
Press the ENT key or BS/C key to return to the SECURITY
CONFIG menu.
Wireless Security WPA-PSK Mode
PSK authentication and an encryption system can be used with wireless security WPA-PSK mode.
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right displays.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Press the BS/C key to return to the SET SECURITY menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (PSK)] and then press the ENT key.
The screen on the right displays.
[1:PRE SHARED KEY]:
Selects TKIP or AES.
Encryption system setting
Sets the shared key.
Barcode Handy Terminal
133