Heart Rate Monitoring; Quick Start; Preset Programs; Lockout Id Processing - Star Trac S-UBx Owner's Manual

HEART RATE MONITORING

Heart rate monitoring allows you to determine if your workout is too challenging or not challenging enough. Monitoring heart
rate is easy with the STAR TRAC S SERIES BIKE. You may use a heart rate strap (not provided with the bike), or you can
simply grasp the silver contact heart rate grips (available on the S-UBx Upright and S-RBx Recumbent bikes only).
NOTE: The Heart Rate monitor is not a medical test, nor is it designed as a medical test. It is simply a guide to target heart rate
training. Please consult with your physician prior to engaging in any strenuous physical activity.
IMPORTANT: The manufacturer does not warrant the heart rate system performance on this product, as the heart rate system
performance varies, based on a user's physiology, fitness level, age, method of use and other factors. Furthermore, the heart rate
system is not for medical use.
C H R M
ONTACT EART ATE ONITORING
You may use the heart rate contact grips (available on the S-UBx Upright and S-RBx Recumbent bikes only) to automatically
check your heart rate. Just follow these steps.
1. Grasp the stainless steel heart rate contact grips; you do not have to squeeze tightly.
2. It may take from 30 to 60 seconds for the heart rate system to acquire and display your heart rate. While your heart rate
is acquired, a pulsing heart displays in the Profile Window.
3. Once your heart rate has been acquired, the Profile Window returns to its normal display mode, and your current heart
rate in beats-per-minute (BPM) displays in the H
4. Release the Heart Rate grips if you wish to remove your heart rate reading from the display.
C S H R M
HEST TRAP EART ATE
You may use the heart rate strap to automatically check your heart rate. Just follow these steps:
1. Before beginning your workout, or during a pause, moisten the back of the transmitter on the heart rate strap (not
included). Place the strap snugly around your chest with the transmitter resting directly over your sternum.
2. When your heart rate has been acquired, your heart rate in beats-per-minute (BPM) displays in the H
3. Remove the heart rate strap, if you wish to remove your heart rate reading from the display.
NOTE: The performance of the transmitter may be affected by body types, body oils, metal in clothing, and outside electrical
interference. Always be sure that the transmitter and skin are in good contact. Avoid operating other electrical equipment near
your treadmill when you use the heart rate strap.

LOCKOUT ID PROCESSING

When the Lockout Enable has been set in Manage / Maintenance Mode (see "Manager Mode" or "Maintenance Mode", as
appropriate), users must enter a Lockout ID number to enable the bike for operation.
To enter a Lockout ID:
1. Mount the bike (refer to "Seat Adjustments") and begin pedaling.
If Lockout Enable is set, the message "BIKE LOCKED; PRESS 0 TO ENTER ID" scrolls across the Profile Window.
n
2. Press the key, then use the keys to enter the three-digit Lockout ID. Entered digits will show in the Profile
Window.
3. When the Lockout ID has been entered, press the
If you enter the correct Lockout ID, the message "VALID ID" scrolls once across the Profile Window. You may
n
continue with normal operation of the bike (see "Quick Start" or "Preset Programs", as desired).
If you enter an incorrect Lockout ID, the message "INVALID ID" scrolls once across the Profile Window. Make sure
n
you have the correct Lockout ID, then repeat steps 1 through 3 to re-enter.
20
R Window.
EART ATE
ONITORING
key.
STAR TRAC S SERIES BIKES O

QUICK START

Quick Start lets you begin your workout by simply pressing one key, or by pedaling for approximately 10 seconds without
pressing any key. Quick Start uses a default weight of 155 pounds (70 kg), a resistance L
YOU control resistance Level during the entire program.
NOTE: The default time and weight are adjustable through Manager / Maintenance Mode.
To operate the Quick Start program:
1. Mount the bike (please refer to "Seat Adjustments" section), and begin pedaling.
If necessary, enter the Lockout ID to enable the bike for operation (see "Lockout ID Processing").
n
2. Press the Q
3. If desired, you can use the personal fan during your workout (see "Using the Personal Fan" for details).
4. You can adjust the resistance L
Use the
n
key to confirm the resistance level.
Press the
n
5. If you wish to pause the program, stop pedaling. The bike enters pause mode and a "P" flashes in the T
Resume pedaling within 25 seconds to continue your workout.
6. When you have reached your workout goal, the bike enters the Cooldown cycle (see "Cooldown Cycle" for details). If you
wish to exit the program before you have reached your workout goal, stop pedaling and allow the Pause timer to expire.
If you wish to skip the Cooldown cycle, press the key to view your workout summary.

PRESET PROGRAMS

The STAR TRAC S-UBx UPRIGHT and S-RBx RECUMBENT BIKES offer 10 preset programs to add variety and challenge
to your workout, including the A
R Window.
EART ATE
Test, individual goal workouts and an auto-pilot program. The STAR S-UB UPRIGHT and S-RB RECUMBENT BIKES offer a
smaller set of 6 preset programs (the Fitness Test and "goal workout" programs are not available on these bikes).
Pre-set programs include:
Allows the user to pre-program a time goal and user weight. Resistance is determined by the user during the
program.
An intense 3-peak ride that allows the user to pre-program a time goal, user weight and maximum resistance
level (from 1 to 20).
Allows the user to pre-program a time goal, user weight and maximum resistance level (from 1 to 20). The
program begins at a resistance level of 1, then increases linearly to the specified maximum resistance level.
Our A
Test, or to utilize other goal-oriented programs.
M P
ANUAL
The M program allows the user to pre-program a time goal and user weight. Resistance is determined by the user during
ANUAL
the program.
To operate the M
1. Mount the bike (refer to "Seat Adjustments" section) and begin pedaling,
If necessary, enter the Lockout ID to enable the bike for operation (see "Lockout ID Processing" for details).
n
2. Press the
3. You are prompted to enter your weight. The bike displays a default weight of 155 pounds (70 kg). You may enter any
weight from 0 to 500 pounds (0 to 226 kg).
' M STAR TRAC S SERIES BIKES O
WNER S ANUAL
S key.
UICK TART
during the program, using either of the following methods.
EVEL
keys to enter a resistance level (from 1 to 20). When the desired level has been entered, press the
or key, as desired, to increase or decrease the resistance L
W function that provides three cardio-intensive training programs, a Fitness
DVANCED ORKOUTS
W programs offer the user the ability to train in specific HR zones, to complete a Fitness
DVANCED ORKOUTS
ROGRAM
program:
ANUAL
key.
' M
WNER S ANUAL
of 1, and a time limit of 99 minutes.
EVEL
in 1 unit increments.
EVEL
Window.
IME
21