Related Manuals for Star Trac Star Trac Fitness E-TR
Summary of Contents for Star Trac Star Trac Fitness E-TR
- Page 1 Universal PVS Kit Star Trac Fitness™ E-TR, E-TBT, E-RB, and E-UB S-TR, S-TBT, S-RB, and S-UB N S T A L L A T I O N A N U A L STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
- Page 2 Install Your TV Bracket on the S-TR......................13 Install Your TV onto Bracket ........................14 Copyright 2008. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
- Page 3 E & S TBT, RB, and UB E & S TR STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
-
Page 4: About This Manual
ABOUT THIS MANUAL This manual is applicable to the STAR TRAC E-Series & S-Series Products. The manual is divided into eight sections, as follows: Introduction Provides an overview of each section within the manual. Before You Get Started Provides guidelines to help you have a successful installation. -
Page 5: Check Facilities Preparedness
CHECK FACILITIES PREPAREDNESS For a proper installation, please read this guide thoroughly and follow the instructions. Star Trac’s goal is to help you have a successful and reliable installation, for this reason we have come up with some helpful tips and check list to accomplish this goal. - Page 6 CAUTION: Disconnect power before doing any installation. Required Tool for Installation Supplied: 5MM Hex Allen Key 3MM Hex Allen Key #2 Phillips Screwdriver Flat Screwdriver STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
-
Page 7: Installing Your
RACKET The Star Trac Universal PVS Kit is different for each of your Star Trac E or S Series Cardio products. Make sure you have the proper kit for the E or S Series product you are installing. The E- & S -UB, E- & S-RB, E- & S-TBT, and E- & S-ST will follow the same basic steps for installation. - Page 8 STEP4 Remove the cap cover with the Star Trac logo from the plastics by removing the (2) screws using a #2 Phillips screwdriver. Retain the screws for later use. You will no longer need the cap cover and, if desired, you can store it away for any possible future use.
- Page 9 Be careful not to pinch any wires. STEP9 Using a #2 Phillips screwdriver, secure the front display to the back with the (8) screws you previously removed and saved. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
- Page 10 Retain all the screws for later use. STEP2 Now remove the upper cap cover that has the STAR TRAC logo on it. This cap is held in by the upper back cover. You will no longer need this cap cover and, if desired, you can store it away for any possible future use.
- Page 11 Check the cap with the neck and grommet. Make sure the cap is flush with the top back plastic. Adjust if necessary. Use the screwdriver to tight - en the screws snug from the previous step. Caution: Do Not over tighten screws. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
- Page 12 (The cover is not used anymore, but you may save it for future use as you like.) STEP2 Install TV bracket: Using a 5mm Hex Allen Key , install the TV bracket to the neck tubing with a 8mm button head screw. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
- Page 13 Using a #2 Phillips screwdriver, to remove the (19) screws from the back of the display. Next, remove the back cover and the upper cap cover with “Star Trac Logo on it ( Y ou will no longer need this cap cover and, if desired, you can store it away for any possible future use).
- Page 14 VESA bracket (packed with hardware kit) onto your TV with (4) M4 socket head screws, as shown. Step 2 Install your TV onto the VESA bracket with (4) M4 ACORN nuts and (4) washers, as shown. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION...
- Page 15 STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.com P/N: 620-7841, Rev. B STAR TRAC E&S SERIES UNIVERSAL PVS INSTA LLATION MANUAL...