Leveling The Bike - Star Trac S-UBx Owner's Manual

To operate the C G program:
ALORIE OAL
1. Mount the bike (please refer to "Seat Adjustments" section) and begin pedaling.
If necessary, enter the Lockout ID to enable the bike for operation (see "Lockout ID Processing" for details).
n
2. Press the key.
3. You are prompted to select the desired A
DVANCED
programs, then press the key when prompted to select the C
4. You are prompted to enter your weight. The bike displays a default weight of 155 pounds (70 kg). You may enter any
weight from 0 to 500 pounds (0 to 226 kg).
Use the keys to enter your current weight; or press the
n
the displayed weight in 1 pound (or 1 kg) increments.
When your correct weight has been entered, press the
n
5. You are prompted to enter your goal for calories expended. You may enter any calorie goal from 1 to 999 calories.
Use the keys to enter your calorie goal; or press the
n
displayed calories in 1 calorie increments.
When your desired calorie goal has been entered, press the
n
6. If desired, you can use the personal fan during your workout (see "Using the Personal Fan" for details).
7. If you wish to pause the program, stop pedaling. The bike enters pause mode and a "P" flashes in the TIME Window.
Resume pedaling within 25 seconds to continue your workout.
8. When you have reached your workout goal, the bike enters the Cooldown cycle (see "Cooldown Cycle" for details). If you
wish to exit the program before you have reached your workout goal, stop pedaling and allow the Pause timer to expire.
To operate the D G program:
ISTANCE OAL
1. Mount the bike (please refer to "Seat Adjustments" section) and begin pedaling.
If necessary, enter the Lockout ID to enable the bike for operation (see "Lockout ID Processing" for details).
n
2. Press the key.
3. You are prompted to select the desired A
DVANCED
programs, then press the key when prompted to select the D
4. You are prompted to enter your weight. The bike displays a default weight of 155 pounds (70 kg). You may enter any
weight from 0 to 500 pounds (0 to 226 kg).
Use the keys to enter your current weight; or press the
n
the displayed weight in 1 pound (or 1 kg) increments.
When your correct weight has been entered, press the
n
5. You are prompted to enter your goal for distance traveled. You may enter any distance goal from 1 to 999 miles (or
kilometers).
Use the keys to enter your distance goal; or press the
n
the displayed distance in 1 mile (or kilometer) increments.
When your desired distance goal has been entered, press the
n
6. If desired, you can use the personal fan during your workout (see "Using the Personal Fan" for details).
7. If you wish to pause the program, stop pedaling. The bike enters pause mode and a "P" flashes in the TIME Window.
Resume pedaling within 25 seconds to continue your workout.
8. When you have reached your workout goal, the bike enters the Cooldown cycle (see "Cooldown Cycle" for details). If you
wish to exit the program before you have reached your workout goal, stop pedaling and allow the Pause timer to expire.
28
W program. Press the key to select the G
ORKOUTS OAL
G program.
ALORIE OAL
or key, as necessary, to increase or decrease
key to accept the displayed value.
or key, as necessary, to increase or decrease the
key to accept the displayed value.
W program. Press the key to select the G
ORKOUTS OAL
G program.
ISTANCE OAL
or key, as necessary, to increase or decrease
key to accept the displayed value.
or key, as necessary, to increase or decrease
key to accept the displayed value.
STAR TRAC S SERIES BIKES O
WNER
CAUTION: Be careful not to pinch your fingers between the console neck
and the bike frame when sliding the console into place.
CAUTION: Be sure not to pinch the display cables between the console
neck and the bike frame.
W
ORKOUTS
While gently pushing the display cables up into the display console
neck, carefully slide the console neck onto the neck brackets until it is
fully seated. Secure the display console to the bike frame with four M6
X 16 button head screws (two screws in front side and two screws in
back side). Tighten all four screws securely.
4. Install the Seat Post
Carefully slide the seat post and seat tube into the seat tube on the bike
frame. Make sure the seat tube is fully bottomed against the frame.
Install the M6 X 10 socket head screw into the hole in the back of the
seat tube. Tighten the screw securely.
Pull out on the seat release knob, and slide the seat post fully into the
seat tube. Release the seat release knob.
W
ORKOUTS
5. Install the Pedals
NOTE: Turn the left pedal spindle counterclockwise when
threading into the crank arm; turn the right pedal spindle
clockwise when threading into the crank arm.
Install the pedals on the pedal cranks using a 5/8-inch open-end
wrench. Tighten the pedals securely.

6. Leveling the Bike

Place the bike on the floor in the position in which it will be used. Use the leveling adjusters (located on the underside of
the front and rear feet) to compensate for uneven floor surfaces and to eliminate wobbling.
You have now completed assembly of your STAR TRAC S-UB / S-UBx UPRIGHT BIKE.
' M STAR TRAC S SERIES BIKES O
S ANUAL
' M
WNER S ANUAL
Step 3d
Step 4
Step 5
13